The float level switches FS00 work according to the lift principle. A hollow float is raised by the rising liquid until it reaches an angle of 45 ° from horizontal when switching takes place. The mercury free float switch can be mounted to the tank or container via a through hole such as a 1/2" cable gland or from the tank top. The switch point is defined by manipulating placement of an optional ballast weight on the connecting cable or by inserting cable through a tube of the desired length. The FS00 level switch consists of a polypropylene housing with an integrated watertight and position dependend electromechanical microswitch. Cable connections from different materials and in different lenghts may be chosen to suit the medium and tank dimensions.
The FS00 float level switches are compatible to virtually all liquid media which do not affect the materials of the switch or cable. The unit is absolutely independent from the pollution of the medium. The FS00 may be used as MIN, MAX monitor, to control valves or pumps or as an alarm swich.
Materials: housing from PP.
Contact function: SPDT, 6 (4) A, 250 VAC colour: orange
Connection cable: LAAP-Therm, olive, for bio oil, grease and chemicals
Cable lenght: 5m
Electrical connection: brown = common blue = signal, switched through with full tank black = signal, switched through with empty tank green / yellow = protective ground
Specifications: Operating temperature: max. 140 °F / 60 °C, with LAPPTherm cable up to 200 °F / 95 °C Storage temperature: max. 200 °F / 95 °C max. pressure: 29 psi / 2 bar Switching angle: +/- 45° Electrical protection: IP68 Weight: Float: 0.24 lbs / 110 g Ballast: approx. 1.54 lbs / 700 g
More information about personal data can be found here!