Safety RFID switches and interlock switches

Safety switches - basic features:

• Safety switches are designed to control the position of moving safety devices
• Functional safety up to category 4, Performance level Pl e (according to EN ISO 13849-1) / SIL 3 (EN 62061)
• Three coding options (standard, individual, individual learning)
• Built-in encryption provides a high level of protection against unauthorized opening
• Housing with IP67/IP69K protection
• Contactless operation via RFID
• They consist of two units, a switch and an actuator
• Use on various doors,covers, safety nets, etc.

		Performance level Pl	Coding	Connector
SD4RAA01	RFID
SD4RAA02	RFID
SD4RAS01IN89	RFID	Cat 4 Pl e	invidual	M12x1, 8-pin
SD4RAS01SN89	RFID	Cat 4 Pl e	standard	M12x1, 8-pin
SD4RAS01TN89	RFID	Cat 4 Pl e	invidual, teach	M12x1, 8-pin
SD4RAS02IN89	RFID	Cat 4 Pl e	invidual	M12x1, 8-pin
SD4RAS02SN89	RFID	Cat 4 Pl e	standard	M12x1, 8-pin
SD4RAS02TIN89	RFID	Cat 4 Pl e	invidual, teach	M12x1, 8-pin

Interlock switches - basic features:

• Safety switches are designed to control the position of moving safety devices
• Functional safety guaranteed up to category 4, Performance level PL e (according to EN ISO 13849-1) / SIL 3 (EN 62061)
• Electronic control in the switch itself, the possibility of a permanent magnet for electronic locking
• Housing with IP67/IP69K protection
• M12 connector for quick replacement
• They consist of two units, a switch and an actuator
• Use on various doors, covers, safety nets etc.

		Coding	Locking force Fmax
SD4ICA01	electromagnetic operation
SD4ICS01SE89	electromagnetic operation	standard	500 N
SD4ICS02SE89	electromagnetic operation	standard	500 N
SD4ICS03SE89	electromagnetic operation	standard	500 N
SD4ICS04SE89	electromagnetic operation	standard	500 N

Stikala za takojšen izklop v sili - osnovne značilnosti:

• These switches are intended to be switched off immediately in the event of an emergency - in which case the machine must be switched off immediately
• Functional safety up to category 4, Performance level PL e (according to EN ISO 13849-1) / SIL 3 (EN 62061) in conjunction with the appropriate safety relay guaranteed
• The narrow and small housing allows mounting on standard profiles and walls
• Different options for combinations of actuator and switches
• Easy installation and M12 connector for quick replacement
• More actuator options - with inability to block, with lightning, secure button..
• Use on various doors, covers, safety nets, etc.

		Coding	Locking force Fmax
SD4ICA01	electromagnetic operation
SD4ICS01SE89	electromagnetic operation	standard	500 N
SD4ICS02SE89	electromagnetic operation	standard	500 N
SD4ICS03SE89	electromagnetic operation	standard	500 N
SD4ICS04SE89	electromagnetic operation	standard	500 N

Activation switches - basic features:

• These switches are intended for manual control of the machine
• They enable the operator or maintenance of the machine to initiate the operation of the machine within the dangerous working area of the machine
• Each person within the hazardous work area must have their own activation switch
• Wenglor switches allow three-stages to stop the machine
• Ergonomic housing design, very low weight
• More actuator options - with inability to block, with lightning, secure button...
• Use on various doors, covers, safety nets, etc.

	Nr. direct contacts	Nr. NO outputs
S2DF001	3
S2DF002		2

Wenglor security modules:

• For realization of safety function through input control
• potential separation on the machine
• The two-channel structure provides functional safety up to category 4, Performance level PL e (according to EN ISO 13849-1) / SIL 3 (EN 62061)
• Mounting on DIN-rail slats - module width only 22,5mm

	Use	Nr. safety outputs 0	Category Stop (EN 60204-1)
SG4-00VA000R2	basic module	3	0
SR4B3B01S	basic module	3	0
SR4D3B01S	basic module	2	0/1
SR4E4D01S	extension	4	0