pico+ ultrasonic sensors
01.06.2021
pico+ the "little guy" that can do it all: 4 ranges, 3 output signals, 2 housing variants and IO-Link interface.
Highlights
- Variant with 90° angled head
- IO-Link interface for support of the new industry standard
- Automatic synchronisation and multiplex operation for simultaneous operation of up to ten sensors in close quarters
- UL Listed to Canadian and US safety standards
- Improved temperature compensation adjustment to working conditions within 120 seconds
- Smart Sensor Profiles more transparency between IO-Link Devices
Basics
- 1 Push-Pull switching output pnp or npn basis
- Analogue output 4–20 mA or 0–10 V
- 4 detection ranges with a measurement range of 20 mm to 1.3 m
- microsonic Teach-in on pin 5
- 0.069 mm to 0.1 mm resolution
- 10–30 V operating voltage
- LinkControl for configuration of sensors from a PC
Description
The pico+ ultrasonic sensors are a compact series with M18 threaded sleeves and a housing length of only 41 mm. In addition to the variants with an axial beam direction, there is also a housing variant with a 90° angled head and radial beam direction.
With four detection ranges from 20 mm to 1.3 m and three different output stages, this sensor family covers a wide range of applications.
Sensors with the Push-Pull output stage support SIO and IO link modes. Sensors with analogue output are optionally available with 4–20 mA current output or 0–10 V voltage output.
In SIO mode, sensors are configured using the microsonic Teach-in procedure on pin 5.
The sensors are Listed to applicable UL Standards and requirements by UL for Canada and the US.
