Capacitive Level Limit Switch Capanivo® 7000
08.11.2021
| ✓ Compact versions with G ½'' thread | ✓ meet the hygiene requirements EHEDG | ✓ DK value ≥ 1,5 |
Figure 1: Capacitive Level Limit Switch for horizontal or vertical instalation
Introducing the completely renewed series of Capacitive Level Limit Switch Capanivo® CN 7000.
Your benefit:
- meets the hygiene requirements of EHEDG
- suitable for CIP and SIP up to +150°C
- compact version with G ½'' thread
- Tri Clamp process connection
- the probe is made of chemically resistant materials PPS, PVDF or PEEK
- »Tip Sensitivity« and »Active Shield« against material build-up
- extended versions for installation from above
- IO-Link communication
- WHG certificate
- Atex version
- extended warranty to 5 years
Application area
The Capacitive Level limit switch is used to detect level of liquids, paste, foams, sludges, slurries, bulk materials and to detect the water level in the oil.
They can be installed on all types of tanks, pipes and silos. The most common applications are:
- Chemical and petrochemical industries
- Food industry
- Breweries and beverage industry
- Pharmacy
- Wastewater treatment plants
- Water supply
- Energetics
- General mechanical engineering
 |
|||
| Capanivo® 7120 | Capanivo® 7121 | Capanivo® 7130 | Capanivo® 7150 |
| short version | short version | extended version | extended version |
| Thread 1.4404 Tri Clamp 1.4404 Flange 1.4404 |
Thread PPS or PVDF | Thread 1.4404
Flange 1.4404 |
Thread 1.4404
Flange 1.4404 |
| EHEDG, only G ½'' | |||
| PPS, PVDF or PEEK probe 4-wire connection, relay 2-wire connection, 8/16 mA 3/4-wire connection, IO-Link |
PPS or PVDF probe 4-wire connection, relay 2-wire connection, 8/16 mA 3/4-wire connection, IO-Link |
PPS or PVDF probe 4-wire connection, relay 2-wire connection, 8/16 mA 3/4-wire connection, IO-Link |
PPS or PVDF probe 4-wire connection, relay 2-wire connection, 8/16 mA 3/4-wire connection, IO-Link |
| Atex | Atex | Atex | Atex |
