Intelligent pressure switch controlling the pump operation. DIG–IBO 1 is an electronic device that performs two basic functions.

Pump operation control

It is possible to set the pressure turn-on and shut-off on the electronic display.

Dry-running protection

If this function is enabled and the pump operates without water for longer than 20 seconds, the device will turn off the pump. Dry-running protection is enabled by default, if for a specific reason the user does not want to leave this function enabled, press buttons No. 2 and No. 4 simultaneously and hold for 3 seconds, the display will show the code F0 (function disabled) or F1 (function enabled by default), if no operation is performed within 3 seconds, it will automatically save and enter run mode.

Activation is dependent on the water pressure in the system dropping below the minimum pressure set on the display and the occurrence of flow in the installation where the regulator is installed. It will turn off when the device senses a stop in flow.