Submersible pump IPC 550
Submersible pump, equipped with an integrated switch, intended for pumping clean and slightly contaminated water that does not contain grinding elements (e.g. sand). Pumps are used to drain flooded rooms, swimming pools and wells. They can also pump water from ponds, rivers, reservoirs and shallow ring wells.
Characteristics:
• The pump pumps out water to a level of approximately 2 mm
(in manual mode)
• In AUTO mode, the pump turns on at a liquid level of approx.
13 cm and turns off at a level of approx. 5 cm
• Discharge connector to which various diameters of the
discharge hose can be adapted
• The float is built into the pump body, so it can be used in
narrow wells and tanks
• Light weight of the pump
• Two operating modes: automatic or manual
• Thermal protection built into the motor winding
• Warranty and post-warranty service
• 24-month warranty
Technical data:
• Maximum liquid temperature: 35°C
• Power supply: 230 V
• Insulation class: B
• Operating mode: continuous
• Ingress protection: IP68
• Power cable length: 10 m
• Working position: vertical
• Motor speed: 2850 RPM
Materials:
• Housing: technopolymer
• Shaft: AISI 304 stainless steel
• Impeller: Noryl
• Mechanical seal: SiC / graphite
| Name | Head | Flow | Motor power | Voltage | Impeller passage | Amperage | Inlet / outlet |
Dimensions Dia / H |
| IPC 550 | 6 m | 100 l/min | 550 W | 230 V | 5 mm | 2.4 A | 1 1/4'' | 20 cm / 31 cm |
Inquiry
More information about personal data can be found here!
Similar products
-
Submersible pump for dirty water and sewage CTR-550
Price without Vat: 145.00 €
Add to basket
Price with VAT: 176.90 € -
Submersible pump Furiatka for sewage with grinding system
Price (without VAT) from: 122.00 €
Add to basket
Price with VAT: 148.84 € -
Submersible pump IP INOX for dirty water
Price (without VAT) from: 85.00 €
Add to basket
Price with VAT: 103.70 €

