Series Athena.Pr
- Electromagnetic dosing pumps
- Digital proporrtional flow with pH/Rx instruments
- pH÷14 - Rx - 999÷+999 mV measuring range
- manual/automatic temperature compensation (pH)
- 4÷20 mA output on all the recording scale
- manual/automatic calibration with probe efficiency evaluation
|
 |
Series Olimpia.bp
- Electromagnetic dosing pumps
- Analogic with constant flow
- PVC pump head suitable for chemical use in the industrial, waste water treatment and portable water applications
- Fireproof and anti-acid polypropylene box
- Flow rate manually adjustable 0÷100%
- Manual priming valve
- Power supply and level probe inlet with quick connection
- Working state led
- IP65 protection degree
|
 |
Series Nike.temp
- Digital peristaltic pump
- Spa swimming pool
- Shower and essences treatment
- Temporised dosing and batch function (1 min)
- Flow rate - 2 l/h
- Pressure - 1,5 bar
- Power supply - 100÷240 VAC
|
 |
Series Bio.temp
- Temporised dosing system
- Flocculent and essences dosing
- Dosing with weekly timer
- Tank level control
- On/off/switch priming
- 240 VAC tension input "Electrical signal from circulating pumps"
- Remote alarm through relays (dry contact)
- Setting of the parameter via menu
- 16x2 display (blue/white)
|
 |
Series Elite.plus
- Dosing system to analyse and adjust pH+, pH- and redox
|
 |
Series Helios
- Automatic control systems
- Software for remote control communication, with serial port and MODBUS RTU protocol to make a network communication with all Helios.05 series
Digital panel supplied with:
- analogic multifunction dosing pumps (athena.am series)
- multiparameter switch board (nexus series)
- pH probe, chlorine probe with regulable flow sensor, sample water, faucet, degassing filter
- PVC panel 40x60 cm
- buffer solution (pH-redox)
- all assembled and cabled ready to be installed
|
 |
Series Steril
- Salt sterilizer
- Based on the principle of the electrolysis
- Salt is turned into sodium hypochlorite
- Automatic safety system / Auomatic stop system
- High technology titanium self-cleaning electrodes
- Easy to read and control thanks to the big backlit LCD display
|
 |
Series Di.fo
- Chlorine meter series Di.fo
- Output relay as set points, maximum and minimum alarms, PWM proportional regulating of time, PFM proportional pulse regulation, self-cleaning
- It is possible to have low voltage 24V enabling the monitoring of smaller doses wit solenoid valves and without the addition of other transformer, with a security power supply
- Galvanic separation between microprocessor/inlets and current outlets
- Off inlet to switch off the regulation relay and to stop the colorimeter cycle, possible FLW input to control the water flow in the instrument, "OK" output remotely controls the correct instrumentation function
- Visualization: Alarms/errors (diagnostic), date/hour (always present, also without power supply), with the possibility to start/stop the colorimeter function pre-set hours (i.e. nighttime)
- Programming and calibration saved in memory
- RS232C serial output for PC, PLC connector available on CANNON 9 connection or terminal block
|
 |
