Features • Superior quality materials • Proven reliable design. • Pump available in PP,PPP, CPVC, PVDF or SS 316. • Lengths of 68,6 cm, 99,1 cm, 119,4 cm, 152,4 cm and 182,9 cm. • One-piece outer tube with screw-on foot.
Benefits Simply insert the pump into the liquid for immediate pumping. No priming is necessary since the rotor is located at the bottom end of the pump. Flow may be controlled with the unique speed control knob on the ODP-S and ENC-S motors to prevent splashing.
Specifications PP Maximum liquid temperature 55°C Most chemically aggressive liquids such as acids, salt solutions and solutions which corrode or oxidize metals, such as hydrofluoric or sulfuric acid. Not for use with flammable liquids.
Waste water treatment / chemical manufacturing / pharmaceutical / agriculture
Performance: 94,6 l/min
Features • Accuracy - within 0.5%. Meter employs "Teach In" calibration or preset "K factors" for various specific gravities. No more estimating or using floor scales to properly measure corrosive chemicals.
Benefits SERFILCO Smart Pumps are engineered to control, measure and dispense any volume of liquid from drums, IBCs, tanks and any large storage vessel.
Specifications Displays volume units in gallons, Imperial gallons, liters, milliliters or cubic meters. Displays flow rate in gallons, Imperial gallons, liters, milliliters or cubic meters per minute, second, or hour. Language can be displayed in English, German
High viscosity drum pump
Industrial & Sanitary
Performance: 64 l/min, 12 bar
Features • Rugged construction • Speed Reduced pump (SR) Max viscosity 25,000 cps/mPas • Direct Drive pump (DD) Max viscosity 100,000 cps/mPas
Specifications SERFILCO Progressive Cavity pumps are engineered to transfer high viscosity materials from drums, tanks and IBC's. Utilizing the principle of positive displacement, these pumps deliver a continuous flow with little product degradation.
Laboratory drum pumps
Performance: 41,6 l/min
Features • Ideal for low volume transfer • PP • 68,6 cm or 99,1 cm
Specifications Versatile, lightweight pump for the transfer of acids or alkalies from glass carboys and similar containers. Pump will handle liquids to 250 cps. Motor is 160 watt with built-in overload and manual reset for safety.
Series "HP" hand dispensing pump
For point-of-use dispensing / filtering of water and chemicals used for: Plating / Pharmaceutical / Industrial / Petroleum products and other stringent applications
Features • Quality engineered thermoplastic construction • Controlled discharge rate
Specifications Designed for the transfer or dispensing of concentrates, additives or other liquids which are purchased in bulk but are used in small quantities.