Various Accessories

Plastic strainer tank

Field of Application:
For pool water circulation pumps with a capacity of max. 56 m³/h, at 60°C, 2,5 bar.

Design:
Capacity approx. 8 liters
Strainer basket mesh size approx. 3,40 x 3,50 mm

Materials used:
Strainer PP TV 40
Lid PC, transparent
Knob PA 6 GF 30
Strainer basket PP

Recommended feeder line:
DN (mm) 75

BADU massage units with BADU wall-/floor nozzle and BADU suction housing

Wall- and floor nozzle
Design I dia. 40 mm,
design II dia. 28 mm Wall nozzle
Design III Ø 5 x 19 mm
(Use as wall nozzle only!) Suction housing

BADU wall- and floor nozzles for pinpoint full-body massage.

Add-ons for any pool model.

BADU wall-/floor Nozzles consisting of:
• Plastic add-on housing with nozzle
• Clamping ring with gaskets and stainless steel screws
• Connections: Rp 2 or glue-on sleeve d 75.

These massage units are optional as:
• Design I with a 40 mm diameter nozzle (powerful, focussed massage jet or gusher)
• Design II with a 28 mm diameter nozzle (powerful, focussed massage jet)
• Design III with five nozzles of 19 mm diameter (wide area massage effect). This model has been designed as a wall nozzle only.

The BADU wall-/floor nozzles can be built in together with the BADU suction housing. The swimming pool water, via the BADU suction housing, flows towards the external centrifugal pump to be provided by the user and from there under high pressure, back into the pool via the BADU wall-/floor nozzles.

BADU Suction Housing consisting of:
• Plastic suction housing, complete with clamping ring, gaskets and stainless steel screws
• Connections:
Glue connection d 110
Flow rate up to max. 55 m³/h

Unions

Special union for BADU 21-40
with inside thread G 2 and glue socket d=50

Plastic adapter ABS
Rp 2¾ x Rp 3/d 110 glue adapter

Ball valves

3-way ball valve
ABS, for PN 6, type DH 50, with actuator

2-Way ball valve
PVC, for PN 10

Union SA
made of ABS