A submersible plastic pump designed for pumping clean and slightly contaminated water. IPC 550 pump has a threaded outlet connection with a built-in non-return valve to which 3 different adapters (which are included with the order) can be attached in order to adapt the outlet diameter to individual requirements. The pumps have a cooling jacket so they do not have to be fully submerged. After removing the suction filter, water can be pumped-off down to 1 mm. Pumping can start at above 5 mm water level. The IPC 550 pump is equipped with an integrated switch so it can be used in narrow wells. An additional advantage is the option to select the automatic or manual operating mode. The IPC 550 pumps are supplied with thermal protection mounted in the motor winding.
APPLICATION: Draining flooded rooms, swimming pools, wells. The pumps can be used in waterholes and for obtaining water from intakes with water surface close to the ground level. The pumps can also be used for pumping rainwater.
Maximum liquid temperature 35°C
Maximum ambient temperature 40°C
Thermal protection: yes
Class B Insulation
Operating mode - continuous
Protection - IP68
IP - Housing: Technopolymer
Shaft and rotor: stainless steel AISI 304
Mechanical seal: ceramics/carbon
Rotational speed of the electric motor: 2850RMP
Electrical cable - 10m H07-RN
Inlet / outlet
Dia / H
20 cm / 31 cm
More information about personal data can be found here!